Wheeled frame as standard
The stainless steel base is always included with the DT80. Four castors with a diameter of 75 mm allow movement; two castors can be locked.
FMZ DT80
DT80 rotary table.
Mobile at work.
An 800 mm rotary table, controlled jar guidance and a stainless steel wheeled base. Together with the FMZ filling machine, it forms a shared mobile filling station.
Mobile automation
One shared place for machine and jars.
With the DT80, the filling machine and rotary table sit on a shared mobile unit. You load empty jars; the jar guide moves them outwards to the filling lane. After filling, the jar deflector guides jars inwards, where they collect for removal. You handle loading, removal and supervision.
Ø 800 mmrotary table diameter / 80 cm
980 × 1,140 mmframe: width × depth / 98 × 114 cm
895 mmworking height to top of rotary table / 89.5 cm
approx. 45 kgweight excluding filling machine
Machine and automation in one place
Position. Lock.
Connect. Produce.
The filling machine slides onto the dedicated height-adjustable mount and locks in place. Machine and rotary table stay together as a mobile filling unit.
Dedicated machine mount
The position for the FMZ filling machine is defined. The height-adjustable stand enables correct positioning and locking.
Controlled by the filling machine
Feeding, detection, stopping and filling are coordinated. Connection is Plug & Play.
Understanding jar guidance
Outside for filling.
Inside after filling.
Jar guide
The jar guide moves empty jars to the outer rim of the rotary table. This brings them to the sensor in a defined position.
Sensor and filling position
The filling machine's sensor detects the jar. The rotary table stops and dosing begins.
Adjustable jar deflector
After filling, the jar deflector guides the jar towards the table centre. The offset can be adjusted from a minimum of 15 mm up to 200 mm.
The number of jars that fit depends on jar diameter, geometry and guide settings. The jars shown do not indicate capacity.
Technical data
DT80 at a glance.
| Rotary table diameter | 800 mm / 80 cm |
|---|---|
| Frame width | 980 mm / 98 cm |
| Frame depth | 1,140 mm / 114 cm |
| Working height to top of rotary table | 895 mm / 89.5 cm |
| Weight | approx. 45 kg, excluding filling machine |
| Power consumption | 90 W |
| Rotating plate / frame | Stainless steel |
| Base frame | Wheeled, included as standard |
| Castors | 4 × Ø 75 mm, 2 lockable |
| Machine mount | Height-adjustable, defined position, lockable |
| Jar guide | Guides jars to the outer rim |
| Jar deflector | Adjustable offset towards the centre: minimum 15 mm up to 200 mm |
| Control / connection | Via FMZ filling machine, Plug & Play |
What's included
The mobile workstation
is already included.
- FMZ DT80 ready to connect
- Stainless steel base with four castors
- Height-adjustable, lockable machine mount
- Jar guide for outward guidance
- Adjustable jar deflector
- Ready-made connection cable
The FMZ filling machine is required separately. Only together do they form the complete mobile filling unit.
Need technical documents for this product? Send us an enquiry so we can provide the relevant information.
Planning operation with the DT80
Check jar guidance for your container
The jar guide moves empty jars outwards. There, they are detected and filled at the filling point. Check the setup with your actual jar dimensions. A larger table alone does not guarantee smooth running for every container shape. Sensor position, guidance and filling position must work together.
Remove filled jars regularly
The jar deflector guides filled jars inwards. They collect there until you remove them. The collection area is not unlimited storage. Watch occupancy and jar flow, and prevent full jars from obstructing further movement. Loading, removal and product supply remain operator tasks.
Position the mobile unit and secure it for use
Machine and rotary table form a shared unit on the wheeled frame. Choose a location where product feed and jar removal are accessible. Secure the setup according to the operating instructions; the machine mount is height-adjustable and lockable. Moving the unit does not replace checking the setup and connections again.
Find the right FMZ solution.
Our specialist dealers advise on machines, equipment and purchasing.